Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Arlington
Dryer vent cleaning in Arlington typically costs $140-$280 for a standard single-family home and $180-$340 for units in multifamily buildings with shared stacks. Most jobs are completed in 60-90 minutes with a written price agreed before any work starts. Call (240) 255-4519 for a free estimate.
We serve Arlington from our Washington, DC dispatch office, with crews regularly working the Rosslyn-Ballston corridor, Crystal City, and the older residential neighborhoods between Route 50 and the Potomac. The density here creates specific vent configurations you don’t see in Fairfax County or Loudoun, and we’ve built our Arlington protocol around them.
Why CleanRun Air Duct Cleaning Rockville Is Arlington’s Preferred Dryer Vent Cleaning Company
We’ve completed dryer vent work in Arlington since 2013, from high-rise stacks in Crystal City to 1940s Cape Cods in Cherrydale where the laundry room sits at the end of a converted gravity-furnace trunk line. Our Arlington customers receive the same documented photo record we deliver on every job: before-and-after images of every duct section we touch, included as a standard deliverable, not an upsell.
Our technicians are background-checked, uniformed, and identified by name before arrival under Haven Standard Clause 3: Verified Crews. Tomas Reyes, who leads CleanRun, requires that every Arlington job start with a written price and end with a photo record - no exceptions. The 365-Day Done Right Promise applies here exactly as it does everywhere we work: if the work is not right, we make it right, backed in writing on every invoice.
We don’t offer “$79 whole-house” coupons because they don’t exist. What we do offer is a free second opinion on any competitor’s written estimate. Bring us a quote from another Arlington duct cleaner and we’ll put our number next to it, line-itemed and in writing.
Our Dryer Vent Cleaning Services in Arlington
Dryer Vent Inspection
Every Arlington job begins with a camera inspection, not a sales pitch. In Rosslyn and Ballston high-rises, we trace the full lint pathway from the in-unit stub through the shared vertical stack, confirming which unit feeds which riser before any agitation begins. In Cherrydale and Dominion Hills homes with retrofitted gravity-furnace trunk lines, we inspect the irregular sheet-metal seams around the dryer exhaust cavity that standard rotary brushes often miss. The inspection produces dated video stills that become part of your documented photo record.
Vent Cleaning
Our Dryer Vent Cleaning crews use professional-grade equipment from Nikro and Abatement Technologies, with flexible shaft tools for Arlington’s narrow or irregular ductwork. Single-family homes in Ashton Heights or Bluemont typically see 60-90 minutes of contact time; high-rise shared stacks may require coordination with property management and extended dwell time at transition joints. We don’t count vents or charge per-floor - one flat price per system, agreed in writing before the first panel comes off.
Lint Removal
Lint in Arlington behaves differently than in drier climates. Summer relative humidity regularly exceeds 70% here, and that moisture binds lint into dense, matted deposits that a fast rotary pass merely polishes. Our crews use source-removal techniques: agitation tools that break the lint matrix, followed by negative-pressure extraction (vacuum collection at the point of disturbance, so debris doesn’t enter your living space). In shared stacks, we install lint traps at transition joints where the building code allows, giving property management a maintenance access point.
Vent Rerouting
Some Arlington homes, particularly 1950s colonials in Dominion Hills where the laundry was added during a basement finish, have dryer runs that exceed 25 feet or include multiple elbows. These configurations violate modern dryer venting standards and create chronic lint accumulation regardless of cleaning frequency. We reroute through shorter paths where structurally feasible, using rigid metal duct (never the flexible foil or plastic that compounds the problem) and documenting the new configuration in your job record.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Arlington
CleanRun crews carry professional-grade equipment from Nikro, Honeywell, and Abatement Technologies - brands you can verify independently before agreeing to any price. We stock common vent caps, transition fittings, and bird guard assemblies sized for Arlington’s mixed housing stock, from the 4-inch standard stubs in Crystal City condos to the 6-inch retrofitted lines in older Cherrydale homes. Parts availability means most reroutes and cap replacements finish same visit, without a return trip that stretches your schedule.
Common Dryer Vent Cleaning Problems We See in Arlington Homes
- Shared stack misdiagnosis in high-rises. A resident on the 14th floor of a Rosslyn tower smells scorched lint, but their in-unit stub is clean. The real blockage sits in the vertical riser, sometimes several floors below, where lint from multiple units has packed at a transition joint. Cleaning only the stub leaves the hazard intact.
- Retrofitted trunk lines in 1940s homes. Cherrydale and Dominion Hills houses converted from gravity warm-air “octopus” furnaces in the 1960s and 70s retain oversized, irregular trunk lines around the dryer exhaust cavity. Standard rotary brushes can’t navigate these seams; flexible shaft tools and extra dwell time are required.
- Humidity-compacted lint. Arlington’s muggy summers keep lint damp and adhesive inside vent walls. A single pass dislodges surface material while the matted base layer remains, progressively restricting airflow until the dryer overheats.
- Undersized or overlong runs in basement conversions. 1950s colonials with finished basements often have dryer runs that snake 30+ feet with three or more elbows. These configurations never dry efficiently and require more frequent cleaning, or preferably rerouting to a shorter path.
Pricing for Dryer Vent Cleaning in Arlington, VA
A standard dryer vent cleaning in Arlington runs $140-$220 for a single-family home with accessible exterior termination and straightforward duct routing. Homes with retrofitted gravity-furnace trunk lines, basement conversions with extended runs, or multifamily units requiring shared-stack coordination fall in the $220-$340 range. Vent rerouting, bird guard installation, or cap replacement add $80-$180 depending on material and access difficulty.
What affects your price: the length and complexity of the duct run, whether we need to coordinate with a building management office, and whether the job requires flexible shaft tools for irregular sheet-metal seams. We deliver one flat price per system, in writing, before any work starts. No per-vent counting, no post-work invoice inflation. Estimates are free. Call (240) 255-4519.
We Also Serve Cities Near Arlington
Our crews work the full DC metro corridor, including Alexandria, Fairfax, Reston, and Herndon. Each city gets the same written-price protocol and documented photo record, with equipment and techniques adjusted for local housing stock and building density.
Serving Arlington, VA - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dryer Vent Cleaning in Arlington
Most likely, yes. Buildings in the Rosslyn-Ballston corridor and Crystal City/National Landing typically use shared vertical risers that serve multiple units, with individual stubs branching off at each floor. Our crew confirms which riser your unit feeds before cleaning anything, using camera inspection to trace the full pathway. If you live in a high-rise and your clothes take two cycles to dry while your lint trap is clean, the blockage is probably not in your unit. Call (240) 255-4519 and we’ll inspect the shared stack.
Every 12-18 months, and more frequently if you dry heavy fabrics regularly. Cherrydale’s 1940s homes with retrofitted gravity-furnace trunk lines have irregular sheet-metal seams around the dryer exhaust cavity that trap lint in cavities standard equipment misses. The pronounced seasonal humidity swing here - 70%+ in summer, dry cold in winter - accelerates corrosion and loosening at those seams, pulling more lint into wall cavities over time. Call (240) 255-4519 to schedule an inspection and we’ll show you exactly what your system looks like inside.
Yes, and we frequently do. Dominion Hills has many 1950s colonials with basement laundry additions that created 25- to 35-foot duct runs with multiple elbows. These extended runs require more contact time and often flexible shaft tools to navigate the full length. If your run exceeds 25 feet or has more than two elbows, we’ll also evaluate whether rerouting to a shorter path is structurally feasible. The written price covers the full system, not just the accessible portion. Call (240) 255-4519 for an estimate.
Burnt odor during or after drying cycles, clothes requiring two cycles to dry, visible lint accumulation around the exterior termination, or excessive heat in the laundry room. In a shared stack building, these symptoms may appear in your unit even when your individual stub is clear, because the blockage sits in the common riser. Our protocol for Arlington multifamily buildings: camera the full stack, identify the source unit or transition joint, coordinate with property management for access, and document everything in the photo record delivered to you. Call (240) 255-4519 if you’re seeing these signs.
It makes incomplete cleaning more dangerous. Humidity above 70% binds lint into dense, matted deposits that stay damp inside the duct. Damp lint conducts heat poorly, so the dryer runs longer and hotter, while the organic material itself becomes more combustible as it partially decomposes. A quick rotary brush pass in humid conditions polishes the surface without removing the source. Our crews use agitation tools that break the lint matrix, followed by negative-pressure extraction that removes it entirely. If it’s been more than 18 months since your last cleaning, or if you’ve never had the shared stack inspected in a high-rise, call (240) 255-4519.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Arlington since 2013.